MiniBikePro
  • Home
  • News
  • Controls & Appearance
  • Suspension & Strength
  • Power & Misc
  • Project

Suspension

 

Picture
Fast50s Stiffer Fork Springs
CRF/XR50
Our fork springs raise the front end up 1 inch over stock and make it handle all the rough stuff far better than the stock units. 
These springs are 60% stiffer than stock springs. Great for riders 150+ lbs. 
Also available in light weight. The Springfork-L is rated for riders 60-150lbs. These also raise the front end the same 1 inch and are 30% stiffer than stock. These are the best springs on the market by far! Also check your bushings t
o see if they need to be replaced. If they are damaged or cracked get a replacement set, just email or ring and ask!

Choose From:-
Springfork50L for riders: 60-120lbs
Springfork for riders: 150lbs +

Price: £42.50 + P&P

 

Picture
Fast50s Chromoly Lower Fork Legs
CRF/XR50
Fast50s Chromoly Lower Fork Legs - 1" longer than stock. Made of 4130 Chromoly and Nickel Plated. Replace your stock legs for strength, durability and extra length for better handling.


We recommend you buy bushings also if you need them there will be an additional cost please let us know.The bushings create a tighter fit preventing the flop and wiggle as in the stockers. Bushings are made of Delrin rather than plastic. You may need a longer brake cable as well, see the page "Parts 1"

Price: £100.00 + P&P

 

Picture
Fast50s Speed Fork Assembly
CRF/XR50
This is still the first and only purpose built xr/crf50 fork set in the world. 

When we receive your order we will need to know your weight and your bike setup, e.g. stock or upgraded.
30mm leading axle damping rod design, with full oil bath design. 
Fully adjustable using internal valving for any riders size and ability. 

Comes with carbon fiber lower fork guards, pinch bolt lower aircraft grade 6160 aluminum triple clamp as well stainless steel axle. 

Please Note: Top triple clamp does not come with this fork set. (Most of our customers all have our top clamp already), If you need a top clamp we have them as well see the page "Parts 1".
This is disk brake compatible as well. It has caliper mounts built onto axle carrier. But right out of the box you can run your stock drum unit. 

Outer for tubes are anodized Gold, Red, or Black

Price: £900.00 + P&P

 

Picture
Fast50s Works Performance Shock
CRF/XR50/KLX/DRZ110
Available in: 
60-100lbs weight set up for the smaller riders,
160-210lbs. for the bigger riders,
200-250lbs. for the even larger riders.

Stock Honda shocks are 9" long - Works Performance Shocks are 10" giving you that extra 1" extra!

All 10" shocks fit the stock frame and swingarm. Also fits all other after market frames. 
Also available are 10.75" long shocks for those riders weighing 160-210lbs. 

Note: The Long 10.75" will not fit through stock sub frame. Must have an after market frame!!! All 10" shocks fit in the stock subframe perfect. This is great shock with race proven performance.

Please specify which shock you require when ordering!

Price: £265.00 + P&P

.

Picture
Elka Rear Shock
KLZ/DRZ110
This shock is regarded as the best aftermarket rear shock for your KLZ/DRZ110


More travel for a smoother ride with loads of clicks of rebound adjustment that does not afffect compression with a wide range of compression adjustment.

Price: Email/Phone for Price

 

Picture
Elka Rear Shock 11"
CRF/XR50
This shock is regarded as the best aftermarket rear shock!
More travel for a smoother ride
(from 2.8 inches - 4.1 inches) with a massive 40 clicks of rebound adjustment that does not afffect compression with a wide range of compression adjustment.

ONE LEFT IN STOCK!
Price: £250.00 + P&P


.

Picture
Elka Replacement Springs
CRF/XR50, CRF/XR70, ATV, TTR50
Get you ride comforted to how you want softer or harder with these high quality Elka replacement shock springs!


ATV: F3.6X200
CRF: SOFT
CRF: HARD

Price: £40.00 + P&P

.

Picture
Two Bros Racing Rear Spring
KLX/DRZ110 2002-2003 ONLY!
This stiffer spring for your KLX/DRZ110 will prevent bottoming out and provide a much more comfortable ride whilst also being safer!

Price: £50.00 + P&P


Strength

 

Picture
Fast50s Billet Frame
CRF/XR50
The BEST frame on the market!
Made of aircraft grade metals to hold up to the abuse any adult can do to it. 1/2 lbs lighter than your stock frame and far stronger. 

The frame comes with a billet sub-frame as shown. Also comes with brake pin and Delrin roller. All after market swingarms produced to fit a stock frame will mount to this frame. Fast50s Logo engraved on neck.

Price: £900.00 + P&P

 

Picture
Fast50s Black Frame
CRF/XR50
Powder coated in black and it is a legitimate 5 times stronger than the mild steel stock unit. 
This frame will hold up to fulltime adult minibike abuse and also fits the stock swingarm. 
Fast50s have tried all types of metals, but nothing worked the way that Chromoly does for heavy minibike abuse. With the works shock, speed forks and fast swingarm combo, your bike will be at least 2 inches taller than stock but will still handle like a champ (not too tall).


Available in Stock size or +1" longer, please state when purchasing!

Price: £350.00 + P&P

 

Picture
Fast50s Fast Black Swingarm
CRF/XR50
Get some extra strength and stability with this swinger now with three length options!! (1.5", 2.5", or 3.5" longer than stock), please state when purchasing!
Made from 4130 Chromoly and is much stronger than your mild steel stock unit.  
Fast50s have tried all types of metals, but nothing works the way that Chromoly does for heavy minibike abuse. Makes your bike handle better with less flex and comes with extended brake rod! 

Price: £165.00 + P&P

 

Picture
Fast50s Footpeg Stay
CRF/XR50/KLX/DRZ110
Keep those feet in place with confidence with Fast50s 4130 Chromoly foot peg stay. 5 times stronger than stock Fits "all" year 50's and 70's With or without stand mount, please state when purchasing!
Tig welded for a clean look and strong feel and finished in a powder coated black.

Price: £70.00 + P&P

 

Picture
Fast50s Billet Ignition Side Cover
CRF/XR50
This ignition cover is made of aircraft grade T-6 aluminum. It is stronger and tougher than the stock cast cover and weighs only 4 ounces more! This cover also comes with an o-ring so that the ignition cover is more protective than stock against water vapour! And is finished off with a machined Fast50s logo. 

Price: £145.00 + P&P

.

Picture
WRP 10" Rim 1.6, 32 Hole

CRF/XR50, CRF/XR70, TTR50, KLX/DRZ110
Upgrades you rims to something decent with these WRP 10" 32 Hole Rim, a perfect match for the Fast50s Billet Spoke Hubs below! Available anodised in black, red, gold or blue!

Price: £30.00 + P&P

 

Picture
Fast50s Front Billet Spoke Hub
CRF/XR50/KLX/DRZ110
These are lighter and stronger than the stock hubs. Made to accept stock size spokes or after market Heavy Duty Spokes. 
Available in red, blue silver, gold or black.

Price: £120.00 + P&P

 

Picture
Fast50s Rear Billet Spoke Hub
CRF/XR50/KLX/DRZ110
These are lighter and stronger than the stock hubs. Made to accept stock size spokes or after market Heavy Duty Spokes. 
Available in black, red or silver.

Price: £140.00 + P&P

 

Picture
Fast50s Front & Rear Billet Wheel Set
CRF/XR50
Made exclusively for the Honda CRF/XR50! Each wheel is 1lb. lighter than the stock wheels. You will not bend or brake these wheels, they are the real deal. And no more replacing spokes! 
Works with stock drum brakes or Fast50s Disk Brakes by Magura. This set includes billet hubs and billet outer wheels. 

Choose from Mag Style (5 Star, Half Moon Cut), Tear Drop Style (as pictured), or Star Pattern (Six Star Design). 

Price: £500.00 + + P&P

 

Picture
Fast50s SupraGlide Fast Plate
CRF/XR50 & CRF/XR70 & KLX/DRZ110
Get some engine protection with this aircraft grade Riveted to our mounting bracket, not welded. (This is so it will NEVER crack) This plate tucks in great as well. 
Available in black, silver or red.

Price: £55.00 + P&P

 

Picture
Fast50s Speed Chain Guide
CRF/XR50/KLX/DRZ110
Protect your chain with this guide made from 6160 Aluminum to replace the stock white plastic unit. This is a affordable yet a bullet proof fix-up. 
Available in black, silver or red.

Price: £15.00 + P&P

 

Picture
Fast50s Steering Head Tapered Bearings
CRF/XR50/KLX/DRZ110
Go on make your bike even tougher... with these high quality tapered steering bearings. 
The kit comes complete with upper and lower tapered roller bearings and upper and lower tapered bearing races.

Price: £26.00 + P&P

Powered by Create your own unique website with customizable templates.